Crystal Radio
stay tuned crystal radio and tube radio website
crystal set



The Radio "Work" Bench
(Work Place)
2004 - 2006
radio work bench

If you would like to share your bench with us, please email me and I will post it here!
If you don't have a digital camera but have a photo, email me and I will give you my snail mail address. I'll do it for you.
If after it is posted you would like to change something, that is no problem! You can even add photos.  
You can click on some photos to enlarge them or
click on the link under the photos for more views


Tip#1..... Puta rug down so you can loose your screws in the carpeting!



Brian Page Workbench
Brian Page
N4TRB

"Mine's not really world class, but it's a start...."

Looks like a good start to me!!




Dave Trott work bench 1
Dave Trott

photo # 2






Sheer simplicity!....?


Bruce Pollack














Art Vandergrift
Art builds "radios" and his son builds "robots"!
Careful not to mix them up Art!!







John Hassell

(VK6JAH )
Australia.
What a mess!....isn't it perfect!







JOSEP BUSQUETS VIÑAS
Catalunya (Costa Brava) - SPAIN








Richard Ferguson
"3D"
www\\3dcrystalradio.com

Hey....That's the same way I use my pool table!
Richard also make some of the coils for other people (kits).
Take a look at his other photos here.
Page 1    Page 2    Page 3










Doug Herigstad

"Creativity is messy by definition"
Doug Herigstad


This has got to get the "Busiest Work Bench" award!

Boy, it's all there!







Bill Meacham
Puerto Rico
(exray on Rap N Tap)

OK, We may have a winner for best photo of a work bench.
Not nessesarily best work bench, just best photo of one.

Bill calls her his "bench tester!"

He said
"Bench doesn't look so nice these days, though."
Bill, we need to talk!! LOL









Roger Horton
K8CIX

Rodger has a lot of room!!!! Check out his other photos below

Page 1    Page 2    Page 3    Page 4  



 
 


Dave Childs
"I try to keep the work bench at a "comfortably busy" level"

Looks perfect to me!!

Photo of his Listening Post Click Here



 
 


David Kraeuter

Welcome to David Kraeuter

"Last crystal set I built was in the 1940s, but my Martian Special now plays 24/7/365"

Yes that gets you a place on the "Work Bench" page !!!
Roll up your sleeves and start building!!



 
 
 


Brian Wingard
Page 1

Brian was a little disturbed with all the "clean" work benches so he submitted his.
Way to go Brian!!  Fair and Balanced, that's what we like!!

Brian is a member of the
Birmingham Crystal Radio Group.



 
 


Dejan's Bench
Dejan is from the Netherlands
This is a serious workbench!
Page 1
 



 
 


Dennie Bishop
Complex (In a simple way)
 



 
 


SteveMcDonald
(VE7SL)
Steve's web site Click Here
 



 


Boyd's Auxiliary Bench
Truth is.... Most of my radios are assembled right here!
No room on the other one!!

Page1     Page2
 



 


Steve Bringhurst's Work Bench
The benches just keep getting better!
Simple yet very sophisticated and elaborate

Enlarged Photo
Photo1  Photo2



 


Lance Borden's Work Bench
(WB5REX)
Very nicely laid out! Everything in it's place and right at your finger tips!!

Enlarged Photo
Photo1  Photo2



 


The Alan Douglas Work Bench
Too much unused room on the bench, don't you think? LOL

Enlarged Photo
Photo1   Photo2Photo3Photo4



 


Only this photo of the three will enlarge (kind of).


Sky's Work Benches
Remember, this is a "new" work bench for Sky.
Give him a little time to make it look "lived in"!

Enlarged Photo
Photo1



 


Dave Healy's Work Bench
(N7DKK)
Dave employs a "watch dog" to keep his bench safe.....or is that a dog that watches?
Heck, I can't remember.

"It's in part of the garage so it gets cold with just the floor heater.
Every time I get up, the dog steals my chair, so I try and not get up much!"

Combo bench and dog house! Smart......very smart!!

Enlarged Photo
Photo1



 
 




Gil Stacy's Work Bench
(NN4CW)
I felt I had to include parts of his email to me because it explains his area better than I could.

"I store my stuff in archaelogical order.  This leads to pleasant discoveries months later as I find things I needed months earlier."

"I got ideas for its layout after seeing photos of a NASA Clean Room used to assemble satellites, optical and electronic components.  Perhaps you mistakenly thought I had sent you NASA photos."

You know,.....that is exactly what I was thinking when I first saw them!!

Enlarged Photo
Photo1   Photo2
 



 


Kevin Anetsberger's Work Bench
Another one of those disturbing work benches!
Although, that back corner seems to be showing some promise! LOL
Very Nice Bench!

Enlarged Photo
Photo1



 




Gordon McCall's Work Benches
Two of seven work benches he has!!

Enlarged Photo
Photo1   Photo2



 


Lou's Work Bench
Portable work bench! That is what that is for!
My wife keeps saying it's for something called "ironing"?
I like Lou's idea much better!
Smart....Very smart!

Enlarged Photo
Photo1



 


Dan Petersen
(W7OIL)
Well, what can be said about a piece of art like this!
Dan's web site Click Here

Enlarged Photo
Photo1
 



 


Ross Moag
Now this is what I call character!!
"I know where nearly everything is misplaced"

Enlarged Photo
Photo1
 



 


Mike Peebles
Mike's Web Page Click Here

Mike's "Area" wouldn't all fit on this photo. I would click on the photo to see the "whole" thing!
I checked it out, looks like it's all there!!

Enlarged Photo
Photo1



 


Dave Schmarder
Dave sent me 4 photos. They were all so beautiful, it was very hard to choose just one!
Dave's Home Page Click Here

Enlarged Photos
Photo1   Photo2Photo3  Photo4Photo5  Photo6Photo7 Photo 8
 


The new "High Voltage" soldering technigue
(Don't try this at home!....or anywhere!)



 


Mike Tuggle
Seriously disturbing!

Enlarged Photo
Photo1



 


Bob Comeau
(VE1ARN)
Bob's Home Page Click Here
Beautiful!

Enlarged Photo
Photo1


 


Darryl Boyd
What a PILE!





Crystal Radio




Return to "Stay Tuned " Home Page


© 1999-2010  Darryl Boyd,  All rights reserved
Copyright Notice:
My website is copyrighted. This includes all images, text, drawings.
If you are thinking of downloading my copyrighted items and selling them on ebay (or anywhere) keep this in mind,
I monitor ebay for such violations.  I will pursue the issue with ebay and in the courts if necessary.
I do not furnish them for  your gain from my hard work.



Send Email To:








b o
y
d
@
b
o
y
d
h

o
u
s
e
.
c
o
m
Because of antispam techniques, you can not "cut and paste" the above text

We have made every effort to ensure that the information provided on this website is accurate and up to date.
All information on this website is informational only and no
guarantees to the accuracy of any of the projects
or circuits on this site or calculators. If you find something you feel is inaccurate, please inform us by e-mail. Be sure to provide a thorough argument to support your case. Confirmed changes will be made as quickly as possible.

The images on this website  are protected by copyright.  They are the property of the owner of this website and may not be used without the owners permission. Please don't use the images made by us on this website without